Fits after modification — plan for sheet-metal work

Your N431226G150 has a replacement — with one honest catch.

Same 12,000 BTU/hr, same 230V. Plan on a minor cutout trim in the field to take the AT12RNW10 — no adapter plate needed.

Also sold as McLean · Hoffman · Pentair · nVent — N431226G150 — 11,000 BTU/hr · 230V · NEMA 4 · R-134A

Yours

N431226G150

43.0″ × 11.5″ × 14.0″ · 127 lbs

Modified fit

Ours, in production

VoltAire AT12RNW10

43.99″ H × 12.30″ D × 16.39″ W · 96.9 lbs · 24% lighter

Fits After Modification Fit details ↓

You'll order: 1× AT12RNW10 — $4,671. Plus a minor cutout trim in the field.

nVent published distributor price $11,190 → yours $4,671 $6,519 stays in your budget

Your Replacement

AT12RNW10

Fits After Modification

12,000 BTU/hr • 230V • NEMA 4

Availability In Stock Ships by tomorrow — VA & ID warehouses

Includes Unit only Minor cutout trim in the field 30-day price lock · no-obligation quote

Built Orlando, FL — UL/cUL Listed

nVent N431226G150 — published distributor price

$11,190 $6,519 stays in your budget (58% less)

Your order total

$4,671

Unit price. Minor cutout trim done in the field.

Start My Order

In stock — ships by tomorrow

Backed by VoltAire’s 12-month warranty (PDF) · UL 484 · Made in Orlando, FL 🇺🇸

RS Online published price, Jul 2026. nVent sells through distributors and doesn't publish list prices — distributor quotes vary.

Home
/
Replacements
/
N431226G150

Existing Unit

N431226G150

11,000 BTU/hr (3223) • 230V

Brand nVent

Series N4312

Capacity 11,000 BTU/hr (3223)

Voltage 230V

Heat Yes

Finish W

Where distributors publish pricing for the OEM equivalent, VoltAire runs 48% less on average (21-70% by model).

VoltAire Replacement In Production

AT12RNW10

12,000 BTU/hr • 230V

Brand VoltAire

Series AT Telecom Series

Capacity 12,000 BTU/hr +9% cooling

Voltage 230V

Heat Yes

Finish Hentzen Off White (NEMA 4)

What You'll Order

1× AT12RNW10 $4,671

Popular options

Heater Cabinet Controller

Condenser intake filter (15×15 Mesh Filter) +$202

Screens sawdust, filings & insects off the condenser coil — not an enclosure air filter; cabinet air stays sealed.

Need a different voltage or capacity? Configure your AT08 / AT10 / AT12 →

14 In Stock — Ships by Tomorrow

Details

Fit Details

Fits After Modification

Same cooling capacity and voltage as the N431226G150 — generally considered a match, just not bolt-for-bolt. The cabinet cutout differs by a small amount, so a quick trim with a sawzall (or similar tool) gets the VoltAire AT12RNW10 into place. Minor field work, no adapter plate required — routine for any installer. Call (844) 925-5668 if you'd like us to walk through the trim before you order.

Unit dimensions — what the tape measure will tell you

	N431226G150	AT12RNW10	Δ
Height	43.0″	43.99″ H	+1.0″
Width	11.5″	16.39″ W	+4.9″
Depth	14.0″	12.30″ D	-1.7″

Existing nVent unit VoltAire replacement

N4312 to AT12 Opening mismatch · provisional cuts shown

The red areas show where the openings differ; no adapter plate is available for this pairing. The red areas come from the manufacturer's spec sheet and must be confirmed against your actual unit before cutting.

Existing nVent AC outline Existing nVent opening New VoltAire unit outline VoltAire opening Existing cabinet metal that may need removal — verify first

The red hatching shows where the VoltAire openings extend into cabinet metal; confirm the installation plan with VoltAire before cutting.

Step 1 of 4 Start with the existing N4312 cabinet pattern.

The two manufacturer drawings are centered on each other for visual comparison only, because a shared mounting reference between the two units has not been verified. Verify every opening against your actual unit before any cutting or mounting. This comparison uses the standard AC AT12 footprint; the 48 VDC AT12RB has different dimensions. This comparison is a visual guide, not a cutting or drilling template. Openings can vary with voltage and production run — verify against your actual unit before any cutting or mounting, and follow the manufacturer's installation template.

Not sure? Talk to a fit specialist — (844) 925-5668.

N431226G150 Replacement — Common Questions

What replaces the McLean N431226G150?

The VoltAire AT12RNW10 — 12,000 BTU/hr at 230V, NEMA 4, UL/cUL Listed and built in Orlando, FL. Fits after a minor cutout trim — no adapter needed.

Will the VoltAire AT12RNW10 fit my N431226G150 cutout?

After a minor cutout trim in the field — no adapter plate needed.

How much does a N431226G150 replacement cost?

The VoltAire AT12RNW10 is $4,671. For comparison, the published distributor price for the nVent N431226G150 is $11,190 (RS Online, Jul 2026). Volume discounts start at 4 units, and every quote locks pricing for 30 days with no obligation.

How fast can I get a replacement for my N431226G150?

The AT12RNW10 is in stock — 14 units on the shelf right now — and ships same or next business day from VoltAire's Virginia and Idaho warehouses.

Is the VoltAire AT12RNW10 an original McLean part?

No. VoltAire is an independent brand — an engineered replacement, not an OEM part. VoltAire Cooling is not affiliated with McLean, Hoffman, Pentair, or nVent. Units are UL/cUL Listed (UL 484) and manufactured in Orlando, Florida.

Why Switch to VoltAire?

Engineered Replacement

Matched voltage and NEMA 4 protection, with the capacity difference stated in plain numbers above — with a clear fit path for your enclosure: direct, adapter plate, or template-guided modification. Built to replace McLean, Hoffman, Pentair, and nVent.

Built & Tested in the USA

Manufactured in Orlando, FL with a 5-point pressure and leak test. In-stock models ship fast from East Coast (VA) and Rocky Mountain (ID) warehouses; built-to-order configurations ship in 4-6 weeks.

48% Below Published Online Pricing, on Average

No distribution markup. Transparent pricing. Volume discounts at 4+ and 7+ units. Integrator pricing available for panel shops.

Need Heat, Stainless, 230V, or Remote Monitoring?

The AT08 is available with electric heat, stainless steel NEMA 4X, 48VDC, and factory ethernet controllers with Lead-Lag, SNMP, and BACnet.

Configure Your AT08 / AT10 / AT12 →

Related Models

N431226G150 (this page) N431226G050 N431226G051 N431226G060 N431226G100 N431226G151

VoltAire Cooling is an independent party and is not affiliated with or endorsed by McLean, Hoffman, Pentair, or nVent. All competitor brand names and model numbers are the property of their respective owners and are used here for identification and compatibility purposes only.