Discontinued — nVent no longer sells it at any price
Your T431016G102 has a drop-in replacement.
10,000 BTU/hr at 230V — the closest 115V option VoltAire builds. The capacity difference is spelled out below, in numbers.
Also sold as McLean · Hoffman · Pentair · nVent — T431016G102 — 10,300 BTU/hr · 115V · NEMA 4X · R-134A
Yours
T431016G102
43.0″ × 15.8″ × 10.9″ · 125 lbs
Ours, in production
VoltAire AT10RNSXX
43.99″ H × 12.30″ D × 16.39″ W · 94.6 lbs · 24% lighter
You'll order: 1× AT10RNSXX — nothing else. $5,939.
Verified fit path — so you're not the one explaining a wrong-fit order.
No price comparison to make — nVent no longer sells this unit at any price. The real cost to weigh is a planned swap now versus an emergency swap after it quits.
Not a like-for-like — capacity step-down
Your T431016G102 is rated 10,300 BTU/hr at 115V. VoltAire doesn't build a 115V unit at that capacity. The closest 115V option, the AT10RNSXX, is 10,000 BTU/hr (about −3% cooling). If you can find a 115V 10,300 BTU/hr unit elsewhere, that's the true like-for-like — if you can't, this one bolts into your existing cutout and runs on your voltage.
One more possibility: can your site take 230V? If an electrician can get you a 230V circuit, the AT10RNSXX gives you the full 10,000 BTU/hr at $5,939 — no capacity compromise. Call (844) 925-5668 and we'll help you weigh the two.
Your In-Production Replacement
AT10RNSXX
Drop-In Fit10,000 BTU/hr • 115V • NEMA 4X
−3% capacity vs your T431016G102 — the closest 115V option VoltAire builds. Not like-for-like.
Need It Faster?
The AT10RNW10 is on the shelf right now — same 10,000 BTU/hr, same 115V, with a 1,000W electric heater included and in the standard off-white cabinet. It ships next business day instead of 4-6 weeks — and it costs $1,697 less.
Take the in-stock AT10RNW10 $4,242Your order total
$5,939
Complete replacement — nothing else to buy.
Backed by VoltAire’s 12-month warranty (PDF) · UL 484 · Made in Orlando, FL 🇺🇸
T431016G102
Where distributors publish pricing for the OEM equivalent, VoltAire runs 48% less on average (21-70% by model).
Same cutout, same bolt pattern as the T431016G102. Unbolt it, bolt in the AT10RNSXX — no drilling, no new holes, no adapter.
Popular options
Screens sawdust, filings & insects off the condenser coil — not an enclosure air filter; cabinet air stays sealed.
Need a different voltage or capacity? Configure your AT08 / AT10 / AT12 →
Built to Order • 4-6 weeks
Fit Details
Drop-In FitSame bolt pattern, same cutout dimensions. Unbolt the T431016G102, bolt up the VoltAire AT10RNSXX — no enclosure modifications needed.
Unit dimensions — what the tape measure will tell you
| T431016G102 | AT10RNSXX | Δ | |
|---|---|---|---|
| Height | 43.0″ | 43.99″ H | +1.0″ |
| Width | 15.8″ | 16.39″ W | +0.6″ |
| Depth | 10.9″ | 12.30″ D | +1.4″ |
This is a verified direct fit — no cutout comparison needed.
Not sure? Talk to a fit specialist — (844) 925-5668.
T431016G102 Replacement — Common Questions
What replaces the McLean T431016G102?
Is the T431016G102 discontinued?
Will the VoltAire AT10RNSXX fit my T431016G102 cutout?
How much does a T431016G102 replacement cost?
How fast can I get a replacement for my T431016G102?
Is the VoltAire AT10RNSXX an original McLean part?
Why Switch to VoltAire?
Engineered Replacement
Matched voltage and NEMA 4 protection, with the capacity difference stated in plain numbers above — with a clear fit path for your enclosure: direct, adapter plate, or template-guided modification. Built to replace McLean, Hoffman, Pentair, and nVent.
Built & Tested in the USA
Manufactured in Orlando, FL with a 5-point pressure and leak test. In-stock models ship fast from East Coast (VA) and Rocky Mountain (ID) warehouses; built-to-order configurations ship in 4-6 weeks.
48% Below Published Online Pricing, on Average
No distribution markup. Transparent pricing. Volume discounts at 4+ and 7+ units. Integrator pricing available for panel shops.
Need Heat, Stainless, 230V, or Remote Monitoring?
The AT08 is available with electric heat, stainless steel NEMA 4X, 48VDC, and factory ethernet controllers with Lead-Lag, SNMP, and BACnet.
Configure Your AT08 / AT10 / AT12 →Related Models
VoltAire Cooling is an independent party and is not affiliated with or endorsed by McLean, Hoffman, Pentair, or nVent. All competitor brand names and model numbers are the property of their respective owners and are used here for identification and compatibility purposes only.