Discontinued — nVent no longer sells it at any price
Your T150116G151 has a replacement — with one honest catch.
Same 1,000 BTU/hr, same 115V. Plan on a minor cutout trim in the field to take the AN01RMSXX — no adapter plate needed.
Also sold as McLean · Hoffman · Pentair · nVent — T150116G151 — 800 BTU/hr · 115V · NEMA 4X · R-134A
Yours
T150116G151
16.5″ × 7.5″ × 6.3″ · 27 lbs
Ours, in production
VoltAire AN01RMSXX
15.75″ H × 10.00″ D × 7.65″ W · 30.0 lbs
You'll order: 1× AN01RMSXX — $4,315. Plus a minor cutout trim in the field.
No price comparison to make — nVent no longer sells this unit at any price. The real cost to weigh is a planned swap now versus an emergency swap after it quits.
Your In-Production Replacement
AN01RMSXX
Fits After Modification1,000 BTU/hr • 115V • NEMA 4X
Your order total
$4,315
Unit price. Minor cutout trim done in the field.
Backed by VoltAire’s 12-month warranty (PDF) · UL 484 · Made in Orlando, FL 🇺🇸
T150116G151
Where distributors publish pricing for the OEM equivalent, VoltAire runs 48% less on average (21-70% by model).
What You'll Order
Popular options
Need a different voltage or capacity? Configure your AN01 →
Built to Order • 4-6 weeks
Fit Details
Fits After ModificationSame cooling capacity and voltage as the T150116G151 — generally considered a match, just not bolt-for-bolt. The cabinet cutout differs by a small amount, so a quick trim with a sawzall (or similar tool) gets the VoltAire AN01RMSXX into place. Minor field work, no adapter plate required — routine for any installer. Call (844) 925-5668 if you'd like us to walk through the trim before you order.
Unit dimensions — what the tape measure will tell you
| T150116G151 | AN01RMSXX | Δ | |
|---|---|---|---|
| Height | 16.5″ | 15.75″ H | -0.8″ |
| Width | 7.5″ | 7.65″ W | +0.2″ |
| Depth | 6.3″ | 10.00″ D | +3.7″ |
The two manufacturer drawings are centered on each other for visual comparison only, because a shared mounting reference between the two units has not been verified. Verify every opening against your actual unit before any cutting or mounting. This comparison is a visual guide, not a cutting or drilling template. Openings can vary with voltage and production run — verify against your actual unit before any cutting or mounting, and follow the manufacturer's installation template.
Not sure? Talk to a fit specialist — (844) 925-5668.
T150116G151 Replacement — Common Questions
What replaces the McLean T150116G151?
Is the T150116G151 discontinued?
Will the VoltAire AN01RMSXX fit my T150116G151 cutout?
How much does a T150116G151 replacement cost?
How fast can I get a replacement for my T150116G151?
Is the VoltAire AN01RMSXX an original McLean part?
Why Switch to VoltAire?
Engineered Replacement
Matched voltage and NEMA 4 protection, with the capacity difference stated in plain numbers above — with a clear fit path for your enclosure: direct, adapter plate, or template-guided modification. Built to replace McLean, Hoffman, Pentair, and nVent.
Built & Tested in the USA
Manufactured in Orlando, FL with a 5-point pressure and leak test. In-stock models ship fast from East Coast (VA) and Rocky Mountain (ID) warehouses; built-to-order configurations ship in 4-6 weeks.
48% Below Published Online Pricing, on Average
No distribution markup. Transparent pricing. Volume discounts at 4+ and 7+ units. Integrator pricing available for panel shops.
Need Heat, Stainless, 230V, or Remote Monitoring?
The AN01 is available with electric heat, stainless steel NEMA 4X, 48VDC, and factory ethernet controllers with Lead-Lag, SNMP, and BACnet.
Configure Your AN01 →Related Models
VoltAire Cooling is an independent party and is not affiliated with or endorsed by McLean, Hoffman, Pentair, or nVent. All competitor brand names and model numbers are the property of their respective owners and are used here for identification and compatibility purposes only.